分離式軸承箱
 Split Plummer block


 

SSN SERIES TACONITE HOUSING
SD


 


 

SNG series Introduction
SNG is our newly developed plummer block that was introduced last year. The main feature of SNG is that it can be interchanged with SNU(SNA), SNH, and SNL series of plummer blocks since they have the exact same size. Moreover, SNG is a multi- function designed plummer block. It provides dimples for various choices of oil / grease locations, eight locations for drainage selections, and various sensor / monitor installing spaces. It also has a reinforced base to handle heavier loads.


 

SNG SERIES
SERIES
SNG500
SNG600
HOUSING RANGE
507-532
607-620
SHAFT DIA
30~140mm
30~140mm
APPLICATION
Our improved design makes this series to handle heavier load rating and is sturdier than SN and SNU series.
LUBRICATION
grease or oil
SEAL SELECTIONS
TSNG(double-lip),Labyrinth(TSU), V-Ring(TA), Taconite(TAU) or end covers (ASNA, NA) if bearing is mounted at the end of a shaft.
REMARK
Available for 4 bolt mounting.can be interchanged with SNU, SNA, SNH, SNL series

 

 

Split Plummer block
 


 

SD SERIES
SERIES
 
SD3100
 
SD3000
 
SD500
 
SD600
HOUSING RANGE
 
 
3134 - 3180
 
3034 - 3076
 
534 - 564
 
634 - 656
SHAFT DIA
 
 
150 ~ 380 mm
150 ~ 360 mm
150 ~ 300 mm
 
150 ~260 mm
APPLICATION
Design to handle higher load rating and moderate speed.
LUBRICATION
Grease standard, circulating oil lubrication available.
SEAL SELECTIONS
Labyrinth(TS)with rubber O cord, Taconite seal(TAC)
End cover(TSA) if bearing is mounted at the end of a shaft.
REMARK
Four bolt mounting with eye bolts on the top for easy handling.


 

SAF SERIES
SERIES
 
SAF 500
 
SAF 600
 
SAF 200
 
SAF 300
HOUSING RANGE
 
 
509 - 544
 
609 - 640
 
216 - 244
 
309 - 340
SHAFT DIA
(inch measurement)
 
 
1 7/16 ~
7 15/6
1 7/16 ~
7 3/16
3 5/8 ~
9 9/16 (d1)
3 ~ 8 5/16(d0)
 
2 1/8 ~
8 3/4 (d1)
1 11/16 ~
7 5/8 (d0)
APPLICATION
design to handle heavy loads and operate in a dusty environment.
LUBRICATION
grease or oil.
SEAL SELECTIONS
L.E.R, Taconite seal (TAC)
End cover(E.P.R) if bearing is mounted at the end of a shaft.
REMARK
SAF series availabe for 4 bolt mounting.
*SAF200 & SAF300 are suitable for stepped
cyclindrical shafts.


 





SDAF SERIES
SERIES
 
SDAF 500
 
SDAF 200
HOUSING RANGE
 
 
520 - 544
 
220 - 244
SHAFT DIA
(inch measurement)
 
 
3 7/16 ~ 7 15/16
4 1/2 ~ 9 9/16(d1)
3 3/16 ~ 8 5/16(d0)
APPLICATION
design to handle extreme heavy loads.
LUBRICATION
grease or oil
SEAL SELECTIONS
L.E.R, Taconite seal (TAC)
End cover(E.P.R) if bearing is mounted at the end of a shaft.
REMARK
SAF series availabe for 4 bolt mounting.
*SAF200 & SAF300 are suitable for stepped cyclindrical shafts.


 

SN SERIES
SERIES
SN 500
SN 600
SN 200
SN 300
SN 3000
SN 3100
HOUSING RANGE
506-532
607-632
207-232
307-332
3024-3038
3122-3132
SHAFT DIA
 
 
25 ~
140mm
30 ~
140mm
 
 
35 ~
160mm
 
 
35 ~
160mm
 
 
110 ~
170mm
 
 
100 ~
140mm
APPLICATION
For moderate load and speeds
LUBRICATION
grease or oil
SEAL SELECTIONS
Felt, ZF, Labryinth (TS)
Or end covers (TSA or NA) if bearing is mounted at the end of a shaft.
REMARK
SN series are for 2 bolt mounting only
*SN200 & SN300 are designed for stepped cyclindrical shafts.


 





SSN SERIES
SERIES
SSN 500
SSN 600
SSN 200
SSN 300
SSN 3000
SSN 3100
HOUSING RANGE
509-532
607-632
209-232
311-332
3024-3038
3122-3132
SHAFT DIA
 
 
40 ~
140mm
30 ~
140mm
 
 
45 ~
160mm
 
 
55 ~
160mm
110 ~
170mm
100 ~
140mm
APPLICATION
Design with solid base to handle heavier loads and speeds than SN.
LUBRICATION
grease or oil
SEAL SELECTIONS
Felt, ZF, Labryinth (TS), Taconite seal (TAC)
or end covers (TSA or NA) if bearing is mounted at the end of a shaft.
REMARK
*SSN200 & SSN300 are designed for stepped cyclindrical shafts.